text.skipToContent text.skipToNavigation
ES
Elija su idioma
  1. Página inicial
  2. Sistema flexible de piezas estándar
  3. 03000
  4. Pernos de bloqueo
  5. Elementos de accionamiento de acero inoxidable para accionamiento a distancia, con palanca de apriete, sistemas de cable Bowden
  6. Elementos de accionamiento de acero inoxidable para accionamiento a distancia, sin función de retención, con palanca de apriete, sistemas de cable Bowden
    7. 03096-07-11234616
Descripción
Elemento de accionamiento
Versión 1
Con palanca de sujeción
Forma
A
Modelo de forma
Sin función de retención
Material del cuerpo de base
acero inoxidable
Superficie cuerpo de base
acabado natural
Material del componente
termoplástico
Color del componente
rojo tráfico RAL 3020
A=Longitud de empuñadura
65,2
D1=Rosca
M20x1,5
L=Longitud
95,6
Carrera S
16
Conexión de cable Bowden
Simple con tornillo de ajuste
D Rosca interior
M6
L1
25
L2
20
L3
21,2
L4
8
Llave del acero
1.4305
SW
22
Tamaño
2
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
no
~ REACh SVHC 1 name > threshold
lead
~ RoHS conformity
yes, with exemption
~ RoHS exemption/s
III/6c
~ TSCA 6(H) conformity
yes

Descripción

Product description
The operating elements for manual operation of the Bowden cable systems were specially designed to match the system-compatible indexing plungers. The combination of indexing plunger and actuating element forms a complete system which can be used for many types of application. Differing grip geometries enable optimal handling for the respective application.

Actuation variants: with detent function, without detent function, with rotation lock, rotary cam.
Grip types: Mushroom grip, T-grip, star grip, clamping lever.
Material

Actuating element 1.4305.
Grip thermoplastic.
Setscrew brass.

Version
Stainless steel parts bright.
Setscrew galvanised.
Plastic grip available in various colours.
Note for ordering
We recommend using the online shop configurator to create a complete system with ease.
Note
When installing the Bowden cables, the following points should be noted:
The length of the free end of the cable can change due to the layout angle, bending radius and load factors. So, after laying the Bowden cable, the length of the counter-bearing (casing) must be adjusted using the adjusting screw supplied. The adjusting screw is also used to set the pretension in the Bowden cable system.
When laying the cable, particular care must be taken to ensure that the bending radius is not below the minimum value, which in this case is R = 65 mm. A radius which is too narrow can lead to increased wear and higher friction.
Also avoid letting the bending radius briefly go below the minimum value when installing, as this can cause damage to the casing. Also, the casing is designed only to support pressure forces. If pulled too sharply, the inner coil will be stretched and permanently damaged.
Scope of delivery
Actuating element with plastic grip and optional setscrew.
On request
Special versions.
Drawing reference
1) Single Bowden cable connection
2) Double Bowden cable connection
3) Single Bowden cable connection with setscrew
Accessory
Pernos de bloqueo 03096-08.
Pernos de bloqueo 03096-09.
Tuercas hexagonales 07212.
Piezas de retención 03099.
Cables Bowden 03096-14.
Cables de alambre 03096-15.
Casquillos de tracción 03096-20.
Casquillos terminales 03096-25.
Tornillos de ajuste 03096-30.
Distribuidores de cable Bowden 03096-50.
Para descargar nuestros modelos CAD, primero debe iniciar sesión. Si aún no ha creado una cuenta, regístrese en "Mi cuenta" (parte derecha de la pantalla) y siga las instrucciones.

Otros clientes también compraron