Metal bellows coupling with radial clamping hub aluminium 23001-0600792424
- Play-free metal bellows coupling with clamping hubs
- For shaft diameters from 10 to 70 mm
- Torque range: 18 - 500 Nm
- Lowest moment of inertia
- Ideal for servo motors and machine tools
Unidad de venta
$3,622.23
más IVA.
Se ha añadido a su cesta de la compra
Descripción
Acoplamiento de fuelle de metal
Versión 1
Con cubo de sujeción radial
Material
del cuerpo
de base
aluminio
Material
del componente
acero inoxidable
L=Longitud
79
A
23
C
(ISO 4029)
M8
D1
(H7)
24
D1/D2
máx.
en chavetero
35
D1/D2
máx.
35
D1/D2
mín.
12
D2
(H7)
24
D4
66
Desplazamiento
radial del árbol máx.
(mm)
0,15
Desplazamiento máx.
axial del árbol
(mm)
0,6
Desplazamiento máx.
del árbol
(°)
1,5
L2
10
L3
29
Momento de inercia
(gm²)
0,33
Par
nominal
Nm
60
Par de
apriete de los
tornillos (Nm)
40
R
66
Resistencia a la torsión
(10³ Nm/rad)
75
Rigidez del muelle
axial
(N/mm)
90
Rigidez del muelle
radial
(N/mm)
1150
Tamaño
60
máx.
revoluciones
r. p. m.
8700
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descripción
Material
Hub aluminium.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Metal bellows coupling with high torsional rigidity. The metal bellows compensates for axial, radial and angular shaft misalignment with low restoring forces. With clamping hubs for fastening to shafts.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
Temperature range
-30 °C to +120 °C.
Assembly
The metal bellows coupling hubs have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aid assembly and removal.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
On request
Desired hub holes D1 and D2 separately with tolerance class or tolerance zone.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Nota importante sobre la descarga de modelos CAD
Para descargar nuestros modelos CAD, primero debe iniciar sesión. Si aún no ha creado una cuenta, regístrese en "Mi cuenta" (parte derecha de la pantalla) y siga las instrucciones.
Otros clientes también compraron
